Installing 2.3.5 Gingerbread XXJVT on Samsung Galaxy S

We have yet another 2.3.5 leaked Gingerbread update for Samsung Galaxy S GT-I9000. This 2.3.5 update is XXJVT and its build date is 29th September 2011.

What’s new?

The credit for this firmware goes to , a senior member on .

For updating Samsung Galaxy S GT-I9000(SGS) to latest version of Gingerbread 2.3.5(XXJVT) you need the following prerequisites: You need to have the Samsung drivers for your SGS installed on the desktop. To do so simply install Samsung Kies. Samsung Kies version 2.0.2.11071_128 can be downloaded from .

Make sure you have charged your battery, 50% or higher is preferable. (To be on a safer side charge your mobile to 100%)

Make sure you have

working. (Turn off your mobile by pressing the power button, once switched off press and hold “power button + menu button + vol down button” simultaneously)

Download the Flashing Package from , contains ODIN3-v1.3 and .512 pit file, the password for the file is “http://www.alychitech.com/”.

The next important point is to download the actual firmware for upgrading. The latest 2.3.5 Gingerbread is i9000XXJVT, here is the

for the firmware.

Once you have all the things mentioned above you can now upgrade your SGS to XXJVT in a few minutes. Kindly follow the instructions mentioned below,Extract the firmware you will find a folder named “i9000XXJVT” inside that folder there will be 3 files,

Enter

by pressing power button + menu button + vol down button simultaneously.

Extract FlashingPackage.rar, open ODIN from that folder and then plug in the USB cable.

Ensure that you see something written in ID:COM after connecting your device.

Select PIT “s1_odin_20100512.pit” from the Flashing Package folder.

Click on PDA and select the PDA file “CODE_I9000XXJVT_CL617736_REV03_user_low_ship.tar.md5” from extracted folder.

Click on PHONE and select the PHONE file “MODEM_I9000XXJVT_REV_00_CL1064602.tar.md5” from extracted folder.

Click on CSC and select the CSC file “GT-I9000-CSC-HOME-MULTI-OXAJVT.tar.md5” from extracted folder.

DO NOT tick Re-Partition.

Check if both Auto Reboot and F.Reset Time are ticked.(both are ticked by default)

Press Start button to begin the flashing process.

You will see the progress in both ODIN and your phone.

Your phone will restart.(You should see green color in PASS and ID:COM fields)

You can now disconnect the USB cable from your phone and follow on screen instructions.

Congratulations! you have now successfully updated your SGS to the latest 2.3.5 Gingerbread firmware(I9000XXJVT).

You can root your

firmware using , check this

for instructions on how to install CF-Root.

You can also install Google Talk with audio/video support on

firmware, by following the guide mentioned .

If you have any questions please feel free to ask!!

Aly Chiman

Aly Chiman is a Blogger & Reporter at AlyChiTech.com which covers a wide variety of topics from local news from digital world fashion and beauty . AlyChiTech covers the top notch content from the around the world covering a wide variety of topics. Aly is currently studying BS Mass Communication at University.

Leave a Reply

Your email address will not be published. Required fields are marked *